Home

     IF YOU DO SOMETHING, DO IT RIGHT, OR DO NOT DO IT AT ALL!

 

                 

Due to the constantly rising fuel prices, and thus a significant increase in the costs of transport services, on 20.02.20012 we introduced a new service called SL ECO TRUCKS

By making appropriate software modifications in the engine control unit (ECU) we are able to reduce fuel consumption by 20% while improving response of the engine – an increase in the power and torque depending on the vehicle model may be up to 20%.

 Sounds like a miracle? Perhaps, but we know what we do and we offer you a 30-day trial period. In case of failure to achieve satisfactory results we return you the whole payment and bring the vehicle to the state before modification.

 

The cost of modification is 500 EUR + VAT
We also grant discounts
2 vehicles - 5%
3 vehicles - 10%
4 and more - to be negotiated

Sample calculation of the costs of fuel on the example of Scania R420 2007.
According to the manufacturer, the average fuel consumption is 32L\100km - a simple theory, because, in practice, it is almost impossible. The current price of diesel is 1.55 EUR per 1 liter.
Let’s take into account the daily mileage of 300km.

300km * 32L\100km                     = 96 liters per day
96L * 1.55 EUR                             = 148.8 EUR
148.8 EUR * 5 days a week          = 744 EUR per week
744 EUR * 4 weeks                       = 2976 EUR per month


The monthly cost of fuel amounts to about 3000 EUR for one truck!

3000 EUR - 20% = 2400 EUR
As you can see from this calculation you save 600 EUR per month! This covers the cost of modification. With each additional month it's clear gain.

Our company has been active on the market for 6 years. We grant a lifetime warranty for our software.


Test us! You don’t risk anything but you can gain a lot.r full list click the link below :

 http://www.alientech-to.it/index.php?option=com_content&view=article&id=156&Itemid=178&lang=en 

Due to the continuous development of our company we announce that from the date of 06.07.2011 as first we offer a service of  Chip Tuning Remapping for Japanese cars with DENSO drivers  such as i.e.

-Mazda 6 2.0D

-Nissan Navara , Pathfinder

-Mitsubishi L200

-Subaru Impreza

 

Also novelty is the deactivation of the DPF (Diesel Particle Filter) in Mazda 6 2.0D, it is a frequently encountered problem, and the cost of replacement in the service costs about € 2000 + vat. The cost of such a service in our company is 300 euros gross.

 

We invite to cooperation auto repair shops, car services and auto dealers  , we'll provide favorable financial conditions, service in your workshop, full professionalism 

We issue vat. invoices

Details under the phone number: 0879162503

 

How do we do it ...

The main parameter that is modified in the program is a dose of fuel. The upper limit of the charging reduction of the turbine is also increased, which results in higher pressure in the intake manifold. Depending on the amount of increased fuel, the injection dynamics angle is accelerated in order that fuel be burn longer without excessive smoking. In addition, in engines with the CommonRaily system the fuel pressure in the main CR rail is increased. The most important element that determines safety of the engine and drivetrain is the torque limiter - here the tuner must have appropriate skills in defining and adjusting the course of torque curve so that the vehicle acceleration be smooth and soft, which is crucial to the service life of the gearbox or a clutch in a vehicle. Modifications are carried out to keep the AFR fuel-air balance and prevent from excessive smoking. Reading and writing can be carried out in several ways: through the OBD connector in the vehicle, through controller's plugs on the diagnostic table and through the BDM connector on the diagnostic table. We mostly use the least invasive technique but it is not always possible and it does not always go together with the safety of engine controller.

        

We don't install ready-made programs

We don't install ready-made programs (made in C...a or others of unknown source).
We make every modification on our own using original licensed program based on original software read from a particular vehicle. Such modifications do not cause any errors or make different indicator lights turn on. There will not be any communication problems with diagnostics computer or other interfaces and the modification will be undetectable for the service station.